Everyone knows how to sew buttons. But there is a small and very simple trick that will allow you to complete this final stage of the sewing project as accurately as possible.
The complexity of the button on the leg lies precisely in this very leg, which must be fixed so that the button "sits" in place and does not dangle.
10 unusual ways to sew a button
Step 1
Mark a place for sewing buttons.
Step 2
Thread a double thread into the needle. Tie a small knot at the end.
Step 3
Fix the thread in the fabric exactly in the marked place for the button.
Life hack: how to sew without knots and ponytails (video)
Step 4
Thread the needle and thread through the hole in the button leg.
Step 5
Then pass the needle and thread through the fabric exactly in the same place where the first puncture was made and the thread was fixed.
Step 6
Holding the button, tighten the thread.
Step 7
Repeat steps 4, 5 and 6 three to four times, threading the needle and thread through the hole on the button leg and into the fabric on the same side.
Step 8
Make a loop around the button leg, thread a needle and thread through it, and tighten. Then pass the needle exactly under the button leg. Repeat this step one more maximum two times.
Sew a button and make a leg of thread, like a real pro
Step 9
Cut the thread.
Done!
Photo: craftsy.com
