Leather apron: pattern for beginners

You can sew it from any other material with not showered cuts. A great model for beginners!

• 
• 
• 

Convenient and practical, with many departments of different sizes, it is useful not only in the kitchen, but also, for example, in the garden or in the creative workshop.
Model from Burda magazine 04/2014.

YOU WILL NEED
Genuine nappa leather with a total area of ​​approx. 8 sq. ft (1 skin) (1 sq. ft. = 30 x 30 cm). Alternatively, faux leather 0.40 m wide 140 cm.
CUT
Detail of an apron 68 cm wide and 35 cm long; large pocket 56 cm wide and 20 cm long; small pocket 15 cm wide and 12 cm long; 4 ties 90 cm long and 5 mm wide.
Cut out all the details no allowances.
SEWING
■ Stitch sections of the apron part along the contours to the edge. Stitch upper sections of pockets to edge.
■ Place a small pocket on a large pocket at a distance of 5 mm from the bottom cut and 12 cm from the right side cut. Stitch a small pocket along the side and bottom sections to the edge. Place a large pocket on the part of the apron at a distance of 1 cm from the bottom cut and 6 cm from the side cuts, stitch to the edge.
■ Divide a large pocket into sections of arbitrary sizes and stitch. For example, lay 1 line on both sides of the small pocket, on the right lay another 1 line at a distance of 5 cm, on the left - 2 more lines at a distance of 3 cm and 1 line at a distance of 4 cm.
■ Place 2 ties next to each other under the side sections of the apron at the upper corners, approx. 3 cmTo sew the stitches on the front side with zigzag stitches.
Photo: burdastyle.
The material was prepared by Elena Karpova.